Fabricated Tee Strainers

Hellan Fabricated Tee strainers are commonly used in pipeline systems where the amount of material to be removed is minimal and is used to remove debris from a fluid to protect downstream mechanical equipment such as condensers, heat exchangers, pumps, compressors, spray nozzles and other equipment.

 Flow Rate vs Pressure Drop

 

Type WC Tee Strainer Flow Through Main

Available in 2″-24″ and custom sized models.  Type WC strainers employ a single, stationary screen to remove solids as they flow through the screen.  Cleaning of the Type WC is accomplished by removing the screen while the system is NOT under pressure.

Type “WC” strainers can be installed in either horizontal or vertical positions and are available with the following connections:  Buttwelded, Flat Face Flanges, Ring Joint Flanges, and Raised Face Flanges.


Size Operation Flow Type Catalog Pages
2″ Manual In-line WC pdficonsmall
2 1/2″ Manual In-line WC pdficonsmall
3″ Manual In-line WC pdficonsmall
4″ Manual In-line WC pdficonsmall
5″ Manual In-line WC pdficonsmall
6″ Manual In-line WC pdficonsmall
8″ Manual In-line WC pdficonsmall
10″ Manual In-line WC pdficonsmall
12″ Manual In-line WC pdficonsmall
14″ Manual In-line WC pdficonsmall
16″ Manual In-line WC pdficonsmall
18″ Manual In-line WC pdficonsmall
20″ Manual In-line WC pdficonsmall
24″ Manual In-line WC pdficonsmall

Click HERE to download the latest version of Adobe Reader to view the PDF.

 

Type WB Tee Strainer Flow Branch to Main

Available in 2″-24″ and custom sized models.  Type WB strainers employ a single, stationary screen to remove solids as they flow through the screen.  Cleaning of the Type WB is accomplished by removing the screen while the system is NOT under pressure.

Type “WB” strainers can be installed in either horizontal or vertical positions and are available with the following connections:  Buttwelded, Flat Face Flanges, Ring Joint Flanges, and Raised Face Flanges.


Size Operation Flow Type Catalog Pages
2″ Manual In-line WB pdficonsmall
2 1/2″ Manual In-line WB pdficonsmall
3″ Manual In-line WB pdficonsmall
4″ Manual In-line WB pdficonsmall
5″ Manual In-line WB pdficonsmall
6″ Manual In-line WB pdficonsmall
8″ Manual In-line WB pdficonsmall
10″ Manual In-line WB pdficonsmall
12″ Manual In-line WB pdficonsmall
14″ Manual In-line WB pdficonsmall
16″ Manual In-line WB pdficonsmall
18″ Manual In-line WB pdficonsmall
20″ Manual In-line WB pdficonsmall
24″ Manual In-line WB pdficonsmall

Click HERE to download the latest version of Adobe Reader to view the PDF.

 

Type WM Tee Strainer Flow Main to Branch

Available in 2″-24″ and custom sized models.  Type WM strainers employ a single, stationary screen to remove solids as they flow through the screen.  Cleaning of the Type WM is accomplished by removing the screen while the system is NOT under pressure.

Type “WM” strainers can be installed in either horizontal or vertical positions and are available with the following connections:  Buttwelded, Flat Face Flanges, Ring Joint Flanges, and Raised Face Flanges.

 


Size Operation Flow Type Catalog Pages
2″ Manual In-line WM pdficonsmall
2 1/2″ Manual In-line WM pdficonsmall
3″ Manual In-line WM pdficonsmall
4″ Manual In-line WM pdficonsmall
5″ Manual In-line WM pdficonsmall
6″ Manual In-line WM pdficonsmall
8″ Manual In-line WM pdficonsmall
10″ Manual In-line WM pdficonsmall
12″ Manual In-line WM pdficonsmall
14″ Manual In-line WM pdficonsmall
16″ Manual In-line WM pdficonsmall
18″ Manual In-line WM pdficonsmall
20″ Manual In-line WM pdficonsmall
24″ Manual In-line WM pdficonsmall

Click HERE to download the latest version of Adobe Reader to view the PDF.

TOP